
JE50R4AWLED
radio motor with electronic limit switch and internal 24V transformer for led
What does the JE50R4AWLED radio motor offer to an awning?
- All settings are managed from any of R4’s remote controls
- Motor for awnings with LED lighting, it has a 24V transformer for direct connection of LED lighting systems up to 80W
- Once the EMSTEEL1LED remote is learned, the motor and the LED function are automatically enabled
- The LED has a dimmer to increase or decrease the intensity of the light according to the needs
- The LED turns off automatically when the awning is completelly closed
- It has 4 preset points (25%, 50%, 75% or 100% intensity) to adjust the closure force from the remote control
- Automatic tensioning of the fabric, when awning is completelly opened, motor reverses the maneuver to fix any fabric imperfections (lengthening of the fibers ...)
- User comfort point easily programmable by the remote control
- It can be controlled locally or from anywhere else, with a smartphone or tablet (Android or iOS), through the IHG hub. Also compatible with Alexa and Google Home

Main features:
Led lighting on your awning powered from the motor:

Thanks to the 24V transformer housed inside the JE50R4AWLED motor, the installer does not need to install an external transformer on the facade or inside the house. The 24V awning LEDs are connected directly to the motor and from the EMSTEEL1L or TITANIUM3L remote control, we can turn on/off the LEDs in addition to dimmer their intensity
Fabric stretching function:

Motor JE50R4AWLED once the awning is fully extended, makes a small upward turn to tighten the fabric, thus ensuring the correction of imperfections derived from time. This function can be disabled from any of the enjoy R4 remote controls, if the user doesn't want have this small upward movement once the awning is opened
Pressure closing system for cassette awnings:

Motor JE50R4AWLED has the SOFT or torque reduction function. Thanks to this function the awning can be closed by pressure without to damage the awning profiles
Comfort and Safety:

SW4, how it works?:
Fully automatic operation, interaction with the wind:

- The sun sensor (once the brightness range is exceeded) send a command to extend the awning
- While the awning is open, a gust of air causes the awning to retract
- After 10 minutes without air and if brightness is above the programmed level, the awning is extended again
- When night falls, when the brightness falls below the programmed the awning is collected
- A next day, after the brightness exceeds the set, the awning is extended
- ...
Fully automatic operation, interaction with low brightness:
Automatic operation with user interruption:
Operation after having disabled and enabled the sun (EMSTEEL1S):
Wiring options:

Technical data:
JE50/40 | JE50/50 | ||||
NM | 40 | 50 | |||
RPM | 17 | 13 | |||
TURNS | ∞ | ∞ | |||
V~HZ | 230~50 | 230~50 | |||
A | 1,06 | 1,06 | |||
W | 244 | 244 | |||
MIN | 4 | 4 |
Main shaft adapters:
ST0905CA - Ogive 70 (Gaviota):

ST0905C - Ogive 70:
ST0910A - Ogive 70 Eccentric:
ST0922 - Ogive 74:
ST0915 - Ogive 78:
ST0917 - Ogive 85:
Main motor brackets:
Motor head adaptable to the awning supports:
Motor with aluminum head and two threaded holes (M6) with 48mm interaxe for the different standard supports of the awning manufacturers:


Standard awning bracket:
Traditional bracket with spigot:
Compatible Products:
![]() |
![]() |
![]() |
![]() |
![]() |
EMSTEE1L |
EMSTEEL1S |
W4MOTION |
SW4 |
IHG hub internet |
Enjoy your awning, also at night:

Remember! with enjoy
you only need the IHG hub







to start enjoying

Alexa, open the blind!

Close the awnings being outside your home

Add a timing and wake up with the sun
