JE60R4AW

JE60R4AW
radio motor with electronic limit switch

What does the JE60R4AW radio motor offer to an awning?

All settings are managed from any of R4’s remote controls
Versatile motor: awnings with articulated arm or straight arm, as well as boxes awnings, semi-boxes or open awnings
When used with boxed awnings, it has 4 preset points (25%, 50%, 75% or 100% intensity) to adjust the closure force from the remote control
Automatic tensioning of the fabric, when awning is completelly opened, motor reverses the maneuver to fix any fabric imperfections (lengthening of the fibers ...)
Deactivate the solar sensor from the front button on the remote control without accessing to settings
3 intermediate points created automatically
User comfort point easily programmable by the remote control
Allows as maximum 15 remote controls, which can be added from a previously recognized one, from the own motor or after a power on
It can be controlled locally or from anywhere else, with a smartphone or tablet (Android or iOS), through the IHG hub. Also compatible with Alexa and Google Home

Main features:

Fabric stretching function:

Motor JE60R4AW once the awning is fully extended, makes a small upward turn to tighten the fabric, thus ensuring the correction of imperfections derived from time. This function can be disabled from any of the enjoy R4 remote controls, if the user doesn't want have this small upward movement once the awning is opened

Pressure closing system for cassette awnings:

Motor JE60R4AW has the SOFT or torque reduction function. Thanks to this function the awning can be closed by pressure, being adjusted from any of the enjoy R4 remote controls. It has 4 presets intensity levels in 25%, 50%, 75% or 100%

Motor with multiple intermediate positions:

Motor JE60R4AW, it has 3 intermediate positions that are created in automatic mode (positions available in the EMSTEEL1M, TITANIUM1, TITANIUM5, TITANIUM10 transmitters), in addition to a fourth preferred user point easily created from the remote control and the standard upper and lower end points

Comfort and Security with the device SW4:

Fully automatic operation, interaction with the wind:

The sun sensor (once the brightness range is exceeded) send a command to extend the awning
While the awning is open, a gust of air causes the awning to retract
After 10 minutes without air and if brightness is above the programmed level, the awning is extended again
When night falls, when the brightness falls below the programmed the awning is collected
A next day, after the brightness exceeds the set, the awning is extended
...

Fully automatic operation, interaction with low brightness:

Automatic operation with user interruption:

Operation after having disabled and enabled the sun (EMSTEEL1S):

Motor JE50R4AW can be used in combination with the SW4 device, so it can be fully automatic. When the brightness exceeds the selected range, the awning is extended to protect us from excess solar radiation, being closed when said brightness falls. At the same time, we can protect the awning from strong gusts of wind, thanks to the SW4 anemometer, since once the wind range is exceeded, the awning will be collected automatically