
JE40SC
mechanical setting by screews, 28rpm
What does the JE40SC radio motor offer to rolling blinds?
- Ø35mm motor, with which you can replace the manual mechanism of a roller blind, to easily motorize it
- High speed motor, to get a quick screen opening or closingEnd limits (upper and lower points) are made in the traditional way by the standard two screws located on the motor head
- Motor with 4-wire cable: Neutral (blue) and two wires corresponding to the direction of rotation (black and brown), in addition to the ground (yellow/green)
- To be connected into a fixed standard switch
- It is aslo possible to connect it with external systems such as receivers, centralization modules or products from third companies as home automation systems...

Main features:
Simplicity motorizing your roller shades:
Motor JE40SC, having a diameter only in Ø 35mm and 3Nm, can be used to motorize a large part of the most conventional roller blinds, even those that are already manufactured
Traditional limits point setting:

Motor JE40SC has the traditional limits setting. On the motor head there are 2 screws that are corresponding with the motor movement, represented by an arrow. It is very important to understand that said arrow does not indicate if the rolling shade is going up or down, but rather indicates the rotation of the motor and therefore the movement that the roller shade will perform
Wiring options:

Technical data:
JE40/3SC | |||||
NM | 3 | ||||
RPM | 28 | ||||
TURNS | ∞ | ||||
V~HZ | 230~50 | ||||
A | 0,49 | ||||
W | 116 | ||||
MIN | 4' |
Main shaft adapters:
ST0720M - Round inner 36,1:

ST0721M - Round inner 41:
ST0722M - Round inner 41:
ST0718M - Round inner 42,5:
ST0716M - Round inner 47:
Main motor brackets:
Brackets (both sides, motor and cap for axle) - model 1:
SP34327 Plate for hanging the JE40 motor in lateral bracket AS1905

AS1905 Bracket for lateral motors side JE30, JE40

AS1903 Cap with spring for round axle 40

AS1904 Bracket for lateral cap side AS1903


AS1905 Bracket for lateral motors side JE30, JE40

AS1903 Cap with spring for round axle 40

AS1904 Bracket for lateral cap side AS1903

Brackets (both sides, motor and cap for axle) - model 2:
Brackets width 66mm (both sides, motor and cap for axle) - model 3:
Compatible products:
![]() |
![]() |
![]() |
![]() |
![]() |
TVPLT868C80TS |
ASSM062-2 |
ASSM062 |
AS19xx |
AS1901 |