EMSTEEL1-L
remote control to command 1 awning with LED individually or a group of awning
special remote control for awnings with LED system
- Remote control EMSTEEL1-L is used to manage up 1 motor individually or a group of motors, installed in awnings with LED system
- As soon as the remote is learned with the motor, both uses are automatically enabled, it is to command the motor as to manage the led
- EMSTEEL1-L has a simple and intuitive operation mode. It has 6 buttons, divided in 2 sides to command easily the awning or other sun protection system:
- Right side has 3 command buttons for stadard use (open, close or stops the application)
- Left side, has 3 buttons to manage the LED, as it can be switch off/on as dimmer it increasing or lowering the brightness
- Stop button, allows also to set an user preferred point
What does the EMSTEEL1-L remote control offer if installed together with the JE50R4AWLED motor?
Operating type:
Individual operating mode (1 channel for 1 awning):
Group operation mode (1 channel for 4 awnigs):
Group operation mode (1 channel for 4 awnigs):What products can I use it with?
- Remote control EMSTEEL1-L is compatible with all enjoy R4 radio motors for awnigs with led systems (powered with JE50R4AWL)
- Enjoy R4 works with frequency 433.92 MHz and has the rolling code system to protect the signal
Packed with the product:
- x1 EMSTEEL1-L remote control
- x1 programming stick
- x1 wall bracket
- x1 screw cover
- x1 plug and screw for fixing bracket
- x1 use and programming manual
- x1 courtesy CR2032 battery (replace when necessary)
