JE50FCH12 & HITEC

JE50FCH12V y HITEC
DC12V low-voltage motor, powered by HITEC battery

What does the motor JE50FCH12V & HITEC offers to roller shutters?

JE50/20FCH12V 20Nm DC12V low voltage motor , with electromechanical limit switch. End limits (upper and lower points) are made in the traditional way by the standard two screws located on the motor head
Push button HITEC with 2200mAH batteries to powered DC12V low voltage JE50/20FCH12V, directly rechargeable by using a 5v micro-usb charger (it is possible to remove the battery for recharging somewhere else) or direct recharging by a solar panel
Optionally: DC-S2 solar panel
Roller shutter can be operated directly from the this push-button HITEC
Allows as maximum 15 remote controls, which can be added from a previously recognized one, from the own motor or after a power on
It can be controlled locally or from anywhere else, with a smartphone or tablet (Android or iOS), through the IHG hub. Also compatible with Alexa and Google Home

Características principales:

HITEC system:

The HITEC system is made up of the HITEC 1️⃣ main unit, which is a push-button by which the 3️⃣ JE50FCH12V low-voltage and mechanical motor can be operated. This main unit 1️⃣ has a 2200mAH battery rechargeable by the 5V HICHARGER 2️⃣ micro-usb charger. We also offer the possibility of connecting a solar panel DC-S2 4️⃣ directly to the unit, so that the recharge is through solar energy. As the HITEC unit has a push-button, motor is operateing directly from this unit

Traditional limits point setting:

Motor JE50FCH12V has the traditional limits setting. On the motor head there are 2 screws that are corresponding with the motor movement, represented by an arrow. It is very important to understand that said arrow does not indicate if the roller shutter is going uo or down, if you see the arrow or down, but rather indicates the rotation of the motor and therefore the movement that the shutter will perform.
in the example:

the upper screw represented by the arrow ⬇ (green color) corresponds to the upper limit (because turning in that sense the blind is rolled up). For setting, we will turn the upper screw in the + direction if roller shutter has to rise more than it stops automatically or in the opposite way if it has to stop at a lower point
the lower screw represented by the arrow ⬆ (red color) corresponds to the lower limit (because turning in that sense the blind is unrolling). For setting, we will turn the lower screw in the + direction if has to downwards more than its stops automatically or in the opposite way if it has to stop at a higher point

Obstacle detection:

Motor JE50FCH12V, if used with obstacle detection pulley AS1310 or AS1315 assembling it on the motor gear box drive, is able to detect when the roller shutts finds an obstacle:

When an object doens't permit to the roller shutter goes down, thanks to the pulley AS1310 or AS1315 the motor rotation is not transmitted to the axis of the roller shutter, so that the shutter will remain stopped while the mechanical motor rotates freely inside the axle. After 4 minutes from the command was sent, HITEC system will stopped automatically the motor operation

You protect your house, we your roller shutters:

La instalación de cerrojos en el terminal o cualquier otro sistema para bloquear la persiana cuando esta está cerrada, es una medida que incrementa la seguridad contra las aperturas desde el exterior. El problema surge cuando olvidamos que la persiana está bloqueada y la accionamos remotamente, ya que el motor forzará todo el sistema hasta que algún componente ceda y se rompa.
El motor enjoy JE50FCH12V, cuenta con un sistema de seguriad interna que protege a la persiana de este tipo de olvidos, al parar la apertura (movimiento de subida) tan pronto como nota que la persiana está bloqueda