W4MOTION
vibration sensor for awnings and other sun protection systems
radio enjoy R4 wind motion sensor
W4MOTION has inside a sensor capable of measuring the oscillations of the lower loading bar of the awning, caused by gusts of wind and depending on the intensity of these oscillations, and if these exceed the pre-established threshold, the awning will closed automatically as a safety measure
- Frequency 433.92 MHz. Compatible with enjoy R4
- Powered with batteries AA x2
- W4MOTION has a potentiometer where you can select from 1 to 9 the threshold of oscillation for which to send the alarm signal, or even the installer can create his own, positioning the potentiometer at the value 0
- Installer can create a specific level to be used at the awning in which the sensor is installed. This customised level is done by positioning the potentiometer at the value 0
- Survival function: if the sensor has no batteries or cannot communicate with the motor, the awning will automatically close for safety
Vibration (wind) sensor operation:
Una vez seleccionada la sensibilidad en el sensor:
- Once the wind intensity has been selected in the sensor:
- when wind exceeds the threshold, the awning is collected (closed)
What products can I use it with?:
- Device W4MOTION, is compatible with all enjoy R4 radio motors and external receivers, but it is recommended to be used with these ones with special functions for awning or sun protection products as JE50R4AW, JE50R4AWL, JE50R4ZIP, JE50R4RH
- Enjoy R4 works with frequency 433.92 MHz and has the rolling code system to protect the signal
Packed with the product:
- x1 Device W4MOTION
- x1 Adhesive double-sided
- x1 use and programming manual
- x2 Batteries AA
