JE50FCM

JE50FCM
motor with mechanical setting by screws

What does the JE50FCM or FCS motor offer to an awning?

End limits (upper and lower points) are made in the traditional way by the standard two screws located on the motor head
Motor with 4-wire cable: Neutral (blue) and two wires corresponding to the direction of rotation (black and brown), in addition to the ground
To be connected into a fixed standard switch
It is aslo possible to connect it with external systems such as receivers, centralization modules or products from third companies as home automation systems...

Características principales:

Traditional limits point setting:

Motor JE50FCM has the traditional limits setting. On the motor head there are 2 screws that are corresponding with the motor movement, represented by an arrow. It is very important to understand that said arrow does not indicate if the awning is going uo or down (depending if you see the arrow up or down) but rather indicates the rotation of the motor and therefore the movement that the awning will perform

Integration with other systems:

Motor JE50FCM due its technical characteristics, can be integrated with other systems. In the example in JE50FCM motor it motorizes an awning and it is connecting into the Teleco device TVPRS868A04B and thus can be combined with a pergola controlled also from Teleco TVALL868LC01-1

Wiring options:

Technical data:

	JE50/10	JE50/20	JE50/30	JE50/40	JE50/50
NM	10	20	30	40	50
RPM	17	17	17	13	13
TURNS	27	27	27	27	27
V~HZ	230~50	230~50	230~50	230~50	230~50
A	0,68	0,84	0,95	0,95	1,06
W	155	203	226	226	244
MIN	4	4	4	4	4