JE50FMM

JE50FMM
motor with mechanical setting by screws and manual operation system

What does the JE50FMM motor offer to an awning?

End limits (upper and lower points) are made in the traditional way by the standard two screws located on the motor head
Motor with 4-wire cable: Neutral (blue) and two wires corresponding to the direction of rotation (black and brown), in addition to the ground (yellow/green)
To be connected into a fixed standard switch
It is aslo possible to connect it with external systems such as receivers, centralization modules or products from third companies as home automation systems...
Possibility to operate the motor, even in the absence of electricity, through a hand crank, thus providing the security that, if necessary, we can open or closed the awning

Main features:

FMM system, motor with manual operation:

Motor JE50FMM has an internal cardan that allows the user to operate the motor through a crank. This operation gives the motor the security that, if necessary, we can close or open the awning even in the absence of electricity. At enjoy we have a series of accessories for the JE50FMM 1️⃣ motor such as the cardan or union fitting AS1935 2️⃣ and the crank AS1782

Traditional limits point setting:

Motor JE50FMM has the traditional limits setting. On the motor head there are 2 screws that are corresponding with the motor movement, represented by an arrow. It is very important to understand that said arrow does not indicate if the awning is going uo or down (depending if you see the arrow up or down) but rather indicates the rotation of the motor and therefore the movement that the awning will perform

Integration with other systems:

Motor JE50FMM due its technical characteristics, can be integrated with other systems. In the example in JE50FMM motor it motorizes an awning and it is connecting into the Teleco device TVPRS868A04B and thus can be combined with a pergola controlled also from Teleco TVALL868LC01-1

Wiring options:

Technical data:

	JE50/20	JE50/30	JE50/40 17rpm	JE50/40	JE50/50
NM	20	30	40	40	50
RPM	17	17	17	13	13
TURNS	27	27	27	27	27
V~HZ	230~50	230~50	230~50	230~50	230~50
A		10,95	1,06	0,95	1,06
W	203	226	244	226	244
MIN	4	4	4	4	4