JE60FCI
motor with mechanical setting by screws
What does the JE60FCI motor offer to an awning?
- End limits (upper and lower points) are made in the traditional way by the standard two screws located on the motor head
- Motor with 4-wire cable: Neutral (blue) and two wires corresponding to the direction of rotation (black and brown), in addition to the ground (yellow/green)
- To be connected into a fixed standard switch
- It is aslo possible to connect it with external systems such as receivers, centralization modules or products from third companies as home automation systems...
- The FCI model has a 16x16mm square metal spigot inserted into the motor head, for use with brackets
Características principales:
Traditional limits point setting:
Motor JE60FMM has the traditional limits setting. On the motor head there are 2 screws that are corresponding with the motor movement, represented by an arrow. It is very important to understand that said arrow does not indicate if the awning is going uo or down (depending if you see the arrow up or down) but rather indicates the rotation of the motor and therefore the movement that the awning will perform
Integration with other systems:
Motor JE60FCI due its technical characteristics, can be integrated with other systems. In the example in JE60FCI motor it motorizes an awning and it is connecting into the Teleco device TVPRS868A04B and thus can be combined with a pergola controlled also from Teleco TVALL868LC01-1
Wiring options:
Technical data:
JE60/80 | JE60/100 | JE60/120 | |||
NM | 80 | 100 | 120 | ||
RPM | 12 | 12 | 9 | ||
TURNS | 27 | 27 | 27 | ||
V~HZ | 230~50 | 230~50 | 230~50 | ||
A | 1,40 | 1,79 | 1,79 | ||
W | 315 | 410 | 410 | ||
MIN | 4 | 4 | 4 |
Main shaft adapters:
Main motor brackets:
SP0906 Bracket with plate 80x30 for spigot 16x16
Compatible products:
RECMAD05 |
ASSM062-2 |
ASSM062 |
ANEM4 |
TVPLT868C80TS |