JE50SC

JE50SC
mechanical setting by screews, 27rpm

What does the JE50SC radio motor offer to rolling blinds?

Ø45mm motor, with which you can replace the manual mechanism of a roller blind, to easily motorize it
High speed motor, to get a quick screen opening or closingEnd limits (upper and lower points) are made in the traditional way by the standard two screws located on the motor head
Motor with 4-wire cable: Neutral (blue) and two wires corresponding to the direction of rotation (black and brown), in addition to the ground (yellow/green)
To be connected into a fixed standard switch
It is aslo possible to connect it with external systems such as receivers, centralization modules or products from third companies as home automation systems...

Main features:

Simplicity motorizing your roller shades:

+

Motor JE50SC, having a diameter only in Ø 45mm and 10Nm, can be used to motorize a large part of the most conventional roller blinds, even those that are already manufactured and with heavy fabrics

Traditional limits point setting:

Motor JE50SC has the traditional limits setting. On the motor head there are 2 screws that are corresponding with the motor movement, represented by an arrow. It is very important to understand that said arrow does not indicate if the rolling shade is going up or down, but rather indicates the rotation of the motor and therefore the movement that the roller shade will perform