TITANIUM3-S
remote control to command up to 3 motors individually + all of them in a group; sun sensor exclusion
special remote control to be used with awnings which works with SW4 (sun-wind sensor)
- Remote control TITAMIUM3-S is used to manage up to 3 motors individually moreover all of them grouped together, installed in solar protection systems
- It has a button dedicated to the activation (sun on) or deactivation (sun off) the commands forwards by sun sensor (SW4). When it is in Sun Off, all the 3 awnings on this remote won't attend the commands from usn sensor
- It has 2 LEDs on the front, which are showing if the solar sensor is activated or not (when we activate/deactivate, the motor confirms with a small movement of the awning)
- TITANIUM3-S has a simple and intuitive operation mode. It has 6 buttons, divided in 2 sides to command easily the awning or other sun protection system:
- Right side has 3 command buttons for stadard use (⬆ Open, ⏹ Stop and ⬇ Closed)
- Left side, has 3 buttons which is automatic way, are providing 3 intermediate points (only for radio motors)
- ⏹ Stop button, allows also to set an user preferred point
- Channel selecting button which are shows in 3 leds, to do it easier for user
What does the TITANIUM3-S (emsteel1s) offer if it is installed together with the JE50R4AW and SW4?
- The sun sensor (once the brightness range is exceeded) send a command to extend the awning
- While the awning is open, a gust of air causes the awning to retract
- After 10 minutes without air and if brightness is above the programmed level, the awning is extended again
- When night falls, when the brightness falls below the programmed the awning is collected
- A next day, after the brightness exceeds the set, the awning is extended
- ...
Remote control with multiple intermediate points:
Remote control TITANIUM1 is capable of managing up to 6 end points on enjoy R4 radio motors (in those motors with these 6 stop points): upper limit switch, 3 intermediate positions (automatically created), as well as a fourth preferred user position that can be easily created from the remote control and the lower limit switch
Operating type:
Individual operating mode (3 channels with 3 awnings):
Group operation mode (it has a channel supplementary to command these 3 awnings in a group)
Next diagram is showing an standard use of TITANIUM3-S:
What products can I use it with?
- Remote control TITANIUM3-S, is compatible with all enjoy R4 radio motors for awnigs and these openes which can works with device SW4 (JE50R4AW, JE50R4AWL, JE50R4ZIP, JE50R4RH)
- Enjoy R4 works with frequency 433.92 MHz and has the rolling code system to protect the signal
Packed with the product:
- x1 TITATIUM3-S remote control
- x1 programming stick
- x1 wall bracket
- x1 screw cover
- x2 plug and screw for fixing bracket
- x1 use and programming manual
- x1 courtesy CR2450 battery (replace when necessary)
with enjoy, command your home
wherever you are
Do you have motorized systems with ENJOY R4 products at your home? now, it is really easy and simple to command them from your smartphone (Android or iOS). Besides, our hub GWE with the app Smart Life are compatible with Alexa and Google Home, so you can also open or closed your roller shutters, awnings, blinds, ... simply with voice commands
