EMSTEEL1S
remote control to command 1 motor individually or a group; with sun sensor exclusion
special remote control to be used with awnings which works with SW4 (sun-wind sensor)
- Remote control EMSTEEL1S is used to manage up to 3 motors individually moreover all of them grouped together, installed in solar protection systems
- It has a button dedicated to the activation (sun on) or deactivation (sun off) the commands forwards by sun sensor (SW4). When it is in Sun Off, all the 3 awnings on this remote won't attend the commands from usn sensor
- It has 2 LEDs on the front, which are showing if the solar sensor is activated or not (when we activate/deactivate, the motor confirms with a small movement of the awning)
- EMSTEEL1S has a simple and intuitive operation mode. Its 3 command buttons allow users open, closed or stops the awning or solar protection system
- Stop button, allows also to set an user preferred point
What does the EMSTEEL1-S offer if it is installed together with the JE50R4AW and SW4?
Fully automatic operation, interaction with the wind:
- The sun sensor (once the brightness range is exceeded) send a command to extend the awning
- While the awning is open, a gust of air causes the awning to retract
- After 10 minutes without air and if brightness is above the programmed level, the awning is extended again
- When night falls, when the brightness falls below the programmed the awning is collected
- A next day, after the brightness exceeds the set, the awning is extended
- ...
Fully automatic operation, interaction with low brightness:
Automatic operation with user interruption:
Operation after having disabled and enabled the sun (EMSTEEL1S):
Operating type:
Individual operating mode (1 channel for 1 awning):
Group operation mode (1 channel for 4 awnigs):
Group operation mode (1 channel for 4 awnigs):
What products can I use it with?
- Remote control EMSTEEL1S, is compatible with all enjoy R4 radio motors for awnigs and these openes which can works with device SW4 (JE50R4AW, JE50R4AWL, JE50R4ZIP, JE50R4RH)
- Enjoy R4 works with frequency 433.92 MHz and has the rolling code system to protect the signal
Packed with the product:
- x1 EMSTEEL1S remote control
- x1 programming stick
- x1 wall bracket
- x1 screw cover
- x1 plug and screw for fixing bracket
- x1 use and programming manual
- x1 courtesy CR2032 battery (replace when necessary)
with enjoy, command your home
wherever you are
Do you have motorized systems with ENJOY R4 products at your home? now, it is really easy and simple to command them from your smartphone (Android or iOS). Besides, our hub GWE with the app Smart Life are compatible with Alexa and Google Home, so you can also open or closed your roller shutters, awnings, blinds, ... simply with voice commands
