Receiver with 433.92 MHz frequency, for managing a mechanical motor or an electronic motor wirelessly. Compatible with all other enjoy R4 products
RECMAD02 works in a double way. Firstly it is a push button from which user can command directly the motor there connected but it is built in receiver, so user can also command the motor wireless from any enjoy R4 remote control

• To be used with motors up to 400 W
• Programming the first remote control when receiver is powered. All the other remotes can be memorized without the need to manipulate the receiver or power
• RECMAD02 admits up to 15 remotes controls
• An external wired push-button (1 key) is available
• Internal connection strip, to facilitate motor and power wiring in
• Step by step function (tilting) can be enable/disable from remote control
• You can command this receiver/motor locally or from anywhere else. What do you need? modem Wi-Fi in 2.4ghz at home; the Smart Life app installed on your smartphone or tablet (android or iOS); and the GWE hub. In addition, it is also compatible with Alexa and Google Home

Individual operating mode (1 receiver for 1 roller shutter):

Attention:

• It is not allow to connect more than 1 mechanical motor directly to the receiver RECMAD02
• If you want to convert several mechanical motors into radio products, you need to use one receiver for each motor
  
• In the case of ELM motors, if they will works in a group, it is possible to connect several motors to the receiver, with the limit that the sum of the watts (W) of these motors does not exceed 400 w

• Receiver RECMAD02, is compatible with all mechanical and electronic motors from our series JE40 and JE50
• It is compatible with all enjoy R4 remotes controls: Titamium, Steel, Murus, ...
• Enjoy R4 works with frequency 433.92 MHz and has the rolling code system to protect the signal