• Frequency 433.92 MHz. Compatible with enjoy R4
• To be used with motors up to 1600 W
• Programming the first remote control when receiver is powered. All the other remotes can be memorized without the need to manipulate the receiver or power
• RECMAD03 admits up to 15 remotes controls
• Internal connection strip, to facilitate motor and power wiring in
• Possibility of connecting courtesy light
• Possibility of connecting the internal push-button plus external key-switch
• Possibility of connection of interior courtesy light and external siren
• Option safety stop by safety edge or photocells
• 4 operating modes: dead man; automatic; 180 seconds working time; using a single button from remote
• You can command this receiver/motor locally or from anywhere else. What do you need? modem Wi-Fi in 2.4ghz at home; the Smart Life app installed on your smartphone or tablet (android or iOS); and the GWE hub. In addition, it is also compatible with Alexa and Google Home

Individual operating mode (1 receiver RECMAD03 for 1 roller shutterEMSR4K1):

Attention:

• It is not allow to connect more than 1 mechanical motor directly to the receiver RECMAD03
• If you want to convert several mechanical motors into radio products, you must use a receiver for each motor
  
• In the case of ELM motors, if they are going to work as a group, several motors can be connected into the receiver, with the limit that the sum of the watts (W) of these motors does not exceed 1600w

Receiver RECMAD03 is compatible with the safety stop system for roller blinds better known as "safety edge" This system is made up of 3 elements:

• Transmitter unit. It receives the order by the rubber detector of the 2-wire terminal, and sends the stop order to the RECMAD03 receiver via radio under the freq. 433.92MHz
• Detector rubber for terminal
• Magnetic connector to deactivate the sensor when it reaches the lower point
• 

As soon as the rubber is pressed by an object, the transmitter unit sends the order to stop the RECMAD03 receiver and it automatically stops the motor (or reverses the maneuver to release said object), avoiding further damage to both the roller shutter and the object that caused the alert:

Attention: the components of the safety edge are not distributed by Enjoy Motors, so they must be purchased externally

• Receiver RECMAD03, is compatible with all mechanical and electronic motors from our series JE40, JE50, JE60 and JE100
• It is compatible with all enjoy R4 remotes controls: Titamium, Steel, Murus, ...
• Enjoy R4 works with frequency 433.92 MHz and has the rolling code system to protect the signal