SW4
Sun & Wind for awnings and other sun protection systems
radio enjoy R4 sun & wind sensors, powered by sun energy
SW4 is a device with a couple of sensors, capable of measuring brightness and wind, and being built in enjoy R4 radio remote control, command a radio motor or external receiver, depending of such conditions
- Powered by an internal rechargeable battery through solar energy
- WIND: 5 levels of wind speed, pre-programmed and easily selectable via the digital display
- BRIGHTNESS: 10 levels of intensity of light, pre-programmed and easily selectable via the digital display
- Security system to disable the solar sensor if wind is present
- Survival function: if the sensor has no batteries or cannot communicate with the motor, the awning will automatically close for safety
- Test mode with which the installer can quickly check if the wind sensor and the sun sensor work correctly, since the capture time is reduced to 10 seconds for the sun and 2 for the wind
- Solar sensor can be activated or deactivated from remotes EMSTEEL1S, TITANIUM3S o TITANIUM3SL, when the awning don't have to be opened automatically by brightness, for instance during winter months or during long absences from the home
Operation of the brightness sensor (sun) and wind sensor:
Fully automatic operation, interaction with the wind:
- The sun sensor (once the brightness range is exceeded) send a command to extend the awning
- While the awning is open, a gust of air causes the awning to retract
- After 10 minutes without air and if brightness is above the programmed level, the awning is extended again
- When night falls, when the brightness falls below the programmed the awning is collected
- A next day, after the brightness exceeds the set, the awning is extended
- ...
Fully automatic operation, interaction with low brightness:
Automatic operation with user interruption:
Operation after having disabled and enabled the sun (EMSTEEL1S):
Once selected light intensity (brightness) in the sensor sensor:
- when the brightness exceeds the threshold, the awning extends
- when the brightness falls below the threshold, the awning is collected
Once the wind intensity has been selected in the sensor:
- when wind exceeds the threshold, the awning is collected (closed)
- when wind falls below the threshold, and if the brightness continues above the selected one, the awning extends (open)
Operation with remote control EMSTEEL1S:
Individual operating mode (1 sw4 for 1 awning):
Group operation mode (1 sw4 for 4 awnings):
Group operation mode (1 sw4 for 4 awnings):
What products can I use it with?:
- Device SW4, is compatible with all enjoy R4 radio motors and external receivers, but it is recommended to be used with these ones with special functions for awning or sun protection products as JE50R4AW, JE50R4AWL, JE50R4ZIP, JE50R4RH
- Enjoy R4 works with frequency 433.92 MHz and has the rolling code system to protect the signal
Packed with the product:
- x1 Device SW4
- x1 wall bracket and cover
- x2 plug and screw for fixing bracket
- x1 use and programming manual
with enjoy, command your home
wherever you are
Do you have motorized systems with ENJOY R4 products at your home? now, it is really easy and simple to command them from your smartphone (Android or iOS). Besides, our hub GWE with the app Smart Life are compatible with Alexa and Google Home, so you can also open or closed your roller shutters, awnings, blinds, ... simply with voice commands
