The remote EMDRY02 is a device capable receive wiring commands and translate them into enjoy R4 radio ones whoch will be send wirless to enjoy R4 radio motors for adjustable roller shutters
This product is suitable to be used when enjoy R4 radio motors or receivers will be combined with other products, from third party (for example with an external home automation system,...). It works like a bridge between both systems

• Commands from third paty company will arrive to EMDRY02 by wire in pulse mode without voltage (dry or neutral contact). After that, it will be translated and the command will be send to the enjoy product wireless
• Remote control EMDRY02 can place the adjustable roller shutter in its upper limit, lower limit or in the used preferred point with the stop button (long signal command)
• Remote control EMDRY02 also can plave the roller shutter in its adjustable point, projected slats or tilted slats; but also open or closed some of these projected slats or vary the angle in which they are
• If each motor must work individually it will be necessary add as many remotes EMDRY02 as motors are installed
• If motors will works in a group, them is enough to add as many remotes EMDRY02 as groups we want to done

• Remote control EMDRY02 is powered directly to AC230V
• Remote control EMDRY02 is connected to external product, and by wiring it gets the commands by pulses in dry contact and always without power

• If each motor must work individually it will be necessary add as many remotes EMDRY02 as motors are installed
• If motors will works in a group, them is enough to add as many remotes EMDRY02 as groups we want to done