JE50R4AWLED

JE50R4AWLED
radio motor with electronic limit switch and internal 24V transformer for led

What does the JE50R4AWLED radio motor offer to an awning?

All settings are managed from any of R4’s remote controls
Motor for awnings with LED lighting, it has a 24V transformer for direct connection of LED lighting systems up to 80W
Once the EMSTEEL1LED remote is learned, the motor and the LED function are automatically enabled
The LED has a dimmer to increase or decrease the intensity of the light according to the needs
The LED turns off automatically when the awning is completelly closed

It has 4 preset points (25%, 50%, 75% or 100% intensity) to adjust the closure force from the remote control
Automatic tensioning of the fabric, when awning is completelly opened, motor reverses the maneuver to fix any fabric imperfections (lengthening of the fibers ...)
User comfort point easily programmable by the remote control
You can command this motor locally or from anywhere else. What do you need? modem Wi-Fi in 2.4ghz at home; the Smart Life app installed on your smartphone or tablet (android or iOS); and the GWE hub. In addition, it is also compatible with Alexa and Google Home

Main features:

Led lighting on your awning powered from the motor:

Thanks to the 24V transformer housed inside the JE50R4AWLED motor, the installer does not need to install an external transformer on the facade or inside the house. The 24V awning LEDs are connected directly to the motor and from the EMSTEEL1L or TITANIUM3L remote control, we can turn on/off the LEDs in addition to dimmer their intensity

Fabric stretching function:

Motor JE50R4AWLED once the awning is fully extended, makes a small upward turn to tighten the fabric, thus ensuring the correction of imperfections derived from time. This function can be disabled from any of the enjoy R4 remote controls, if the user doesn't want have this small upward movement once the awning is opened

Pressure closing system for cassette awnings:

Motor JE50R4AWLED has the SOFT or torque reduction function. Thanks to this function the awning can be closed by pressure without to damage the awning profiles

Comfort and Safety:

Motor JE50R4AWLED can be used in combination with the SW4 device, so it can be fully automatic. When the brightness exceeds the selected range, the awning is extended to protect us from excess solar radiation, being closed when said brightness falls. At the same time, we can protect the awning from strong gusts of wind, thanks to the SW4 anemometer, since once the wind range is exceeded, the awning will be collected automatically

SW4, how it works?:

Fully automatic operation, interaction with the wind:

The sun sensor (once the brightness range is exceeded) send a command to extend the awning
While the awning is open, a gust of air causes the awning to retract
After 10 minutes without air and if brightness is above the programmed level, the awning is extended again
When night falls, when the brightness falls below the programmed the awning is collected
A next day, after the brightness exceeds the set, the awning is extended
...

Fully automatic operation, interaction with low brightness: