JE50R4ZIP
radio motor with electronic limit switch
What does the JE50R4ZIP radio motor offer to a zip screen?
- Dedicated motor for outdoor roller blinds, Zip Screen type (rack/zip system)
- Wind stop detection during descent. When the screen is descending this motor is able to stop and close it automatically if the wind causes a pressure on the fabric that prevents the correct descent
- Obstacle detection. When the screen is descending and it finds an obstacle, this motor is able to stop and go back a few centimeters so that the screen fabric is not damaged
- All settings are managed from any of R4’s remote controls
- 3 intermediate points created automatically
- User comfort point easily programmable by the remote control
- Allows as maximum 15 remote controls, which can be added from a previously recognized one, from the own motor or after a power on
- You can command this motor locally or from anywhere else. What do you need? modem Wi-Fi in 2.4ghz at home; the Smart Life app installed on your smartphone or tablet (android or iOS); and the GWE hub. In addition, it is also compatible with Alexa and Google Home
Main features:
Safety stop by wind, when zipscreen is unrolling ⏬:
Motor JE50R4ZIP has the safety stop function. When the motor detects that the Zip screen cannot continue descending, it stops automatically and reverses, trying to completely lower another 2 more times (3 in total):
- If the zipscreen is stopped for 3 times but in different positions, motor understands that the mesh has a great resistance due the wind, hindering its normal descent. For safety pourposes, motor will completely roll up the zipscreen, so that the hard wind does not damage it
Safety stop by obstacles, when zipscreen is unrolling ⏬:
Motor JE50R4ZIP has the safety stop function. When the motor detects that the Zip screen cannot continue descending, it stops automatically and reverses, trying to completely lower another 2 more times (3 in total):
- If the zipscreen is stopped for 3 times but in the same point, motor understands that there is an real obstacle (a chair, a pot, ...). For safety pourposes, motor will stopped and bounce up some centimeters to release the obstacle
Motor with multiple intermediate positions:
Comfort and Safety:
SW4, how it works?:
- The sun sensor (once the brightness range is exceeded) send a command to extend the awning
- While the awning is open, a gust of air causes the awning to retract
- After 10 minutes without air and if brightness is above the programmed level, the awning is extended again
- When night falls, when the brightness falls below the programmed the awning is collected
- A next day, after the brightness exceeds the set, the awning is extended
- ...
Wiring options:
Technical data:
JE50/10 | JE50/20 | JE50/30 | |||
NM | 10 | 20 | 30 | ||
RPM | 17 | 17 | 17 | ||
TURNS | ∞ | ∞ | ∞ | ||
V~HZ | 230~50 | 230~50 | 230~50 | ||
A | 0,68 | 0,84 | 0,95 | ||
W | 155 | 203 | 226 | ||
MIN | 4 | 4 | 4 |
Main shaft adapters:
Main motor brackets:
with enjoy, command your home
wherever you are
Do you have motorized systems with ENJOY R4 products at your home? now, it is really easy and simple to command them from your smartphone (Android or iOS). Besides, our hub GWE with the app Smart Life are compatible with Alexa and Google Home, so you can also open or closed your roller shutters, awnings, blinds, ... simply with voice commands